If you have settled on Spectrum Internet as your brand new internet service provider, then all you got to do is to install the Internet. Self – installation is easy if you have above-average technical knowledge. Spectrum Internet is well known for speed and reliability, but what should you do for Spectrum Internet installation?
There are a lot of elements to consider when you decide to install your internet service yourself. You need equipment, and technical knowledge to know where everything goes. We’ll walk you through every step of spectrum self-internet installation.
Is Self Installation The Right Choice?
If you don’t wish to go through any hassle, then you should definitely opt for professional installation. While Spectrum Internet installation prices are low, you still have to pay a certain amount of money. Plus, you must be physically available at the time of installation. You can save a lot of time and money just by installing your service yourself. All it needs is a little bit of technical knowledge and guidance.
Self Installation of Spectrum Internet
Hooking in your internet service is easy and simple. Spectrum always includes a self-help guide in the Internet installation kit, in case you wish to install the internet service yourself.
Here’s what to expect in the self-installation kit:
- Self-help guide
- Ethernet Cable
- Coaxial Cable
- Two Power Cables
These are all the things you will find in the Spectrum Internet installation kit. Before jumping straight onto the installation, make sure everything is accounted for so that you don’t run into any trouble in between the installation.
Steps to Installing Your Spectrum Internet Service
Once you’ve gone through the list of stuff in a self-installation kit. It’s time you get started on the installation. Follow these simple guidelines to set up your Spectrum Modem & Router:
- Plug one end of the coaxial cable into your Spectrum Modem and the other end into a cable outlet.
- Connect one of the power cables to the modem and wait for it to start. The boot-up process can take up to 5 minutes. You’ll know when the process is complete as the “online” light will turn solid.
- Connect the Ethernet cable from the Modem to Wireless Router
- Connect the second power cable to your spectrum wireless router and wait for it to start. The process can take up to 10 minutes. When the Router shows solid green light, it means you can move on to the next step.
- Connect your device to the new Spectrum Internet Wi-Fi network. The name and the Password of the Wi-Fi network will be printed on the back of your Wireless Spectrum router.
Spectrum Internet Service Activation
If you have completed the above-mentioned steps, then activating your spectrum internet service will be a piece of cake for you. Once you have connected your desktop or laptop to your brand new connection, just open a browser and it will automatically take you to the activation web page.
If the activation doesn’t begin itself, then you can just visit spectrum.net/selfinstall to activate your spectrum internet service.
What to Expect from Professional Installation
If you opt for the professional installation, then you must pay $49.99 extra on your Internet bill. Plus, you’ll have an appointment window of 3-4 hours minimum. That means you can’t go anywhere during that window.
The benefit of professional installation is that you don’t have to worry about whether you have technical knowledge. You just have to sit while the professional goes through his daily routine. The best part is that you don’t have to worry if something goes wrong during installation as there is already help available.
There are a few things you should keep in mind if you choose professional installation:
- Keep the area clean for the technician to work easily
- Make sure you know where you want the outlets installed.
- Make sure Whatever device you want to be hooked up to the spectrum internet is at home at the time of installation.
Also, Keep in mind if you have bought a triple play bundle from spectrum then you don’t have to pay for professional installation. Spectrum waives off the Installation cost on the triple play bundle.
Should I Buy or Rent the Equipment?
While getting a brand new internet plan, you must have thought to yourself whether you wish to buy the equipment or rent it. The choice is yours to make, as they both will offer you great benefits. Unless you want something specific in your equipment, we suggest you stick with renting as it is more convenient.
Renting: Spectrum includes a Modem and a Wireless router in your Internet plan. You must pay a minimum monthly rental, and you can be assured that the equipment will be compatible with your plan. Also, when you choose a spectrum wireless router and modem troubleshooting, assistance and tech support become much easier.
Buying: In case you are looking to buy your own equipment, spectrum provides a list of recommended Modems that are compatible with spectrum internet plans. That way, you can save a lot of time on research.
Professional Installation vs. Self Installation
If you are still confused about whether you want to Spectrum Internet Installation by yourself or you need professional help. Then you can look at the advantages and disadvantages of both options.
Spectrum Professional Installation
|No Technical Experience required||The extra cost (free of cost for the triple play)|
|On-site troubleshoot||Have to be physically present at the time of installation|
|Huge Time Window|
Spectrum Self Installation
|Installation window as per your convenience||No, on-site help for troubleshooting|
|No installation cost||Basic tech knowledge required.|
We suggest you do spectrum self-internet installation by yourself as it gives you more flexibility. You also don’t have to spend more money. Plus, you get the experience in case you ever wish to switch your internet service provider in the future.