Troubleshoot Guide: WiFi Connected But No Internet Access

wifi connected no internet access

It”s annoying and frustrating when your devices are WiFi connected but No internet access. How do you deal with a problem with the internet connection? Almost all of us have encountered the problem of “WiFi connected, No Internet Access”. Fortunately for you, there is no single solution to solve your “WiFi Connected but no internet access trouble. This means you will have to try multiple solutions to fix your problem. Read below to find out all the possible solutions to learn “how do I fix WiFi Connection but no internet access”.

Fix Your Router First

To identify the cause of the problem, you have to check whether the trouble is with your device or with the Router itself. Connect multiple devices to your WiFi, if the internet works on all of them except your mobile device, then the problem is with your Mobile. In the other case, the internet doesn’t work on any device, the problem is with your Router or Internet connection itself. 

One way you can fix your Router is to restart it. Though it may sound unreal, the router restarts and flushes out all the caches. If your router and modem are separate devices, restart both of them!

  • Turn off the devices
  • Wait for 30 seconds
  • Turn on the modem and one minute later turn on your router
  • Wait for a few minutes and check the internet connection

Problem with The Internet Connection

Sometimes the WiFi Connected no internet access error may occur. These kinds of errors occur with the internet itself, not with any device. The reason could be any, broken cables, service disruptions, or anything else. These factors are not in your control so you can’t do anything about it.

Recommended  How to Choose Cell Phone Carrier? Questions You Need to Ask

If the internet light on your modem is not blinking properly then the problem lies with your internet service provider. Ideally the DSL light and power light should be on as well. If these lights are not or not flickering constantly then you should call your internet service provider right away!

DNS Cache Conflict

A DNS cache stores all the recent and old visits to the websites, so your internet connection can load web pages faster for you! In simple terms, when you type in a URL in your browser, your browser completes it automatically. This is because of the DNS Cache. Sometimes this DNS cache becomes corrupted due to technical glitches, or when it comes in contact with viruses and malware. Advertisements and banner on various sites can contain malware too that may eventually result in DNS cache conflict. 

The corrupted DNS cache stops you from connecting to the internet, solely because there is a conflict in your DNS Cache. To fix this error, all you have to do flush the DNS cache. For this, you will have to learn how to use the command prompt to fix WiFi. Fortunately for you, we are going to guide you through every single step. 

Press Windows + R and type “cmd” into the search box! The command prompt will open, type the following command to flush the DNS cache: Ipconfig/flushdns

This will automatically flush your DNS Cache, restart your computer to see if you can connect to the internet now!

IP Address Conflict

An IP Address Conflict means when two or more devices on your internet connection are assigned the same IP. When this error happens, all the devices that are assigned the same IP can’t connect to the network. Though IP conflict is rare, in case it does happen, it will happen due to these reasons:

  • When two devices are assigned the same IP address
  • One device is assigned an IP address that’s in the DHCP range and the same IP is assigned to another device by DHCP server that’s connected on the network
  • When your laptop is in a sleep mode, then the IP is assigned to another device on the same network, when you tun on your network, there could be an IP Conflict.
  • An IP conflict can happen when you have several routers connected to the same network.
Recommended  Common Network Problems And Their Solutions: Internet Troubleshoot Tips

If you wish to solve that problem then you have to learn how to use command prompt to fix WiFi. Follow the commands listed below to solve the IP conflict: Ipconfig/release

The DHCP server will assign a new IP address for your computer after you type this command in the command prompt. If that doesn’t work then do this:

  • Press Windows + R and type “ncpa.cpl” in the search bar. This command opens all the available network connections.
  • Select your network, right-click on it and select properties
  • Select Internet protocol 4 (IPV4) and click on the “properties” button
  • When the next dialog box opens, select the option “Obtain an IP address automatically”

Restart your router once and then try to connect to the WiFi connection to check if your problem has been resolved. If it doesn’t help then you have to contact your manufacturer and upgrade the firmware.

Conclusion: WiFi Connected But No Internet Error

The error is highly common and highly frustrating. WiFi connected with no internet access error can stop you from connecting to the internet. It happens due to a multitude of reasons, so we suggest you try the solutions we have listed above to solve your error. If it doesn’t work then we suggest you contact your Internet service provider.

Leave a Reply

Your email address will not be published. Required fields are marked *